Description
Gainsborough’s 8.5 se is simple to use with a start/stop push button and a single dial which controls the flow rate and the temperature. No other switches or buttons are needed as our 'spray control' technology has done away with this necessity.
'Spray Control' technology maximises the water flow by:
- automatically adjusting to the incoming mains water supply temperature
- maintaining an even spray pattern.
The advanced silicone nozzles in the showerhead expand and contract according to the rate of flow - these 'active' nozzles are unique to Gainsborough.
Free 1 year manufacturer guarantee
Features
- 8.5kW power rating
- Gloss white finish with white & chrome accessories
- Simple to operate
- Push button start/stop
- Single dial controls both flow and temperature
- ‘Spray control’ maximises flow by adjusting to the incoming mains water supply temperature
- Single mode showerhead with rub-clean spray plate to minimise build up of limescale
- Phased shutdown safety feature
- 1 year guarantee
- BEAB approved
Technical info
- Minimum operating pressure - 0.09MPa (0.9 bar) (at a flow rate of 8 litres per minute)
- Maximum operating pressure - 1.0MPa (10 bar)
- Water entry - 15mm top, bottom or rear on right side of unit to 15mm push fit connector (provided)
- Cable entry - top, bottom or rear on right side of unit
- Unit dimensions - H297xW217.76xD103.57mm
- Cable size chart